Embossed stamping and Bleach painting ATC

Image - unfinished ATC

For this swap you will make 1 (one) ATC for 1 (one) partner

REQUIREMENTS: card ( black works best), clear embossing pad, clear or black embossing powder (black powder if you're using coloured card ) paint brush ( cheap nylon ) normal household bleach undiluted, open pattern stamp ( close or photo stamps - most are not suitable ) Heat gun

*Stamp your chosen stamp onto the card from the clear embossing pad and emboss with clear or black embossing powder, depending on your card colour ( red works)

*Paint the image with the undiluted bleach. Dry completely. This step can be repeated 2 or 3 times depending on the card used or the effect required.

*Dry naturally as the heat will flatten the embossing .
*The bleached areas can be painted/coloured in or left bleached. any coloring medium - twinkling H2o's can look effective on black card, *Embellish with further embossing, stamping, stick on sparkles etc

Standard ATC size 2.5 inch x 3.5 inch ( measured ) on sturdy card applies and ideally should be mounted onto black mat card

Please include the name of the swap as well as your information on the back of the ATC.

This swap is sender's choice and does not need to be created based on your partner's profile preferences.

Any queries ? please ask